Start with the job
Plastering services, and who does them.
18 kinds of work plasterers, renderers and dry liners are hired for across the UK, each with how the work is done, how to choose someone for it, and what to ask before you book.

Plastering and skimming
Skimming over existing plaster that has gone tired but is still sound, floating and setting a bare brick or block wall in two coats
Plasterers for plastering and skimmingRendering
Rendering a solid wall or blockwork extension in sand and cement, hacking off blown render and making good the substrate
Plasterers for renderingPlasterboarding and dry lining
Boarding a solid wall on dabs of adhesive to take a skim, boarding out a stud partition both sides
Plasterers for plasterboarding and dry liningSilicone and monocouche render
Basecoat, mesh and topcoat over blockwork on a new build, recoating a tired sand and cement render with a thin-coat system
Plasterers for silicone and monocouche renderExternal wall insulation
Fixing EPS or mineral wool board to a solid wall and rendering over it, extending sills, soffits and downpipes to clear the new wall line
Plasterers for external wall insulationFloor screeding
Sand and cement screed over insulation on a new slab, liquid anhydrite screed on an underfloor heating manifold
Plasterers for floor screedingStud walls
Timber stud partition to split a bedroom, boarded both sides, metal stud partition where weight or fire rating matters
Plasterers for stud wallsCeiling repair
Overboarding a cracked or bowed ceiling and skimming it, taking down a failed lath and plaster ceiling and reboarding
Plasterers for ceiling repairCoving and cornice
Fitting plaster coving around a room and filling the joints, matching an existing victorian cornice profile in a run
Plasterers for coving and corniceVenetian and polished plaster
Polished Venetian plaster to a feature wall in multiple thin coats, microcement to a bathroom wall or floor as a jointless finish
Plasterers for venetian and polished plasterArtex and textured ceilings
Overboarding a textured ceiling and skimming it flat, skimming directly over a sound textured coating where it will take it
Plasterers for artex and textured ceilingsPebbledash
Hacking off failed pebbledash back to the brick, rendering over sound pebbledash with a thin-coat system
Plasterers for pebbledashCrack and patch repairs
Cutting out and refilling a crack from movement, then scrimming it, patching where a radiator, socket or fireplace has come out
Plasterers for crack and patch repairsRe-plastering after damp
Hacking off to a metre above the highest salt staining, rendering in sand and cement with a salt retardant additive
Plasterers for re-plastering after dampLime plastering
Lime plastering a solid wall that has to stay breathable, lime rendering a stone or cob elevation
Plasterers for lime plasteringCeiling roses and mouldings
Fitting a plaster ceiling rose around an existing pendant, matching a damaged rose to the original pattern
Plasterers for ceiling roses and mouldingsTape and joint
Taping, filling and sanding board joints to a paint-ready finish, finishing to a specified level on a commercial fit-out
Plasterers for tape and jointCommercial plastering
Metal stud partitioning across an office or retail fit-out, suspended ceiling grid and board to a specification
Plasterers for commercial plasteringBefore you get a quote
Give your job a better starting point.
What should I tell a plasterer?
The room or wall, roughly how big it is, what is on it now, any damage you can see, how easy it is to get to and when you would like it done. Photos help them judge whether they need to see it first.
Should I compare on price alone?
Compare written quotes for the same work: preparation, materials, taking away waste, protecting floors and fittings, and any access equipment. Ask what is left out.
Skim or replaster?
A skim goes over plaster that is sound; plaster that is loose, hollow or damp usually has to come off first. Skim or replaster, explained.